826K Landfill Compactor

Benefits & Features

Efficiency and Productivity

See more

Efficiency with Eco Mode

The Eco Mode when active allows the machine to go into auto-shift when machine is not operating at maximum torque conditions. This feature will automatically shift from 1st gear to 2nd gear with a capped engine top speed. The feature senses the need for ground torque and will upshift and downshift accordingly, optimizing performance and thus saving fuel. This feature can be easily enabled or disabled on the soft keypad.

Decelerator Pedal

The left pedal acts as a brake, transmission neutralizer and an engine decelerator to override the engine speed selected by the throttle lock. This enables the operator to slow down when the throttle lock is engaged and to return to throttle lock without pressing a resume or set button again. This aids in maneuvering around trucks, tractors or any other obstacle.

Steering and Transmission Integrated Control System (STIC™)

Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.

Simple side-to-side motion turns machine right or left, minimizing operator movements
Easy to operate finger controlled gear selection
Smoother, faster cycles help reduce operator fatigue through the use of low effort integrated controls

Steering System

Confident machine operation starts with precise machine control enabled by the 826K's load sensing hydraulic steering system.

Increase efficiency with our variable displacement piston pumps
Achieve precise positioning for easy loading in tight areas with 43 degrees each way of steering articulation
Enhance operator comfort with integrated steering and transmission control functions

Electro Hydraulic Controls

Operators increase productivity with our responsive implements feature.

Operate comfortably through electronically controlled hydraulic cylinder stops
Handle easy-to-use soft detent controls

Structures

See more

We know the harsh environment your machines encounter at the working face of your landfill on a daily basis. This is why the 826 is specifically designed and made with purpose built structures to remain safe and durable for the long run.

Robust Structures

Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions.

Full box-section rear frame resists torsional shock and twisting forces
Heavy-duty steering cylinder mounts efficiently transmit steering loads into the frame
Axle mounting has been optimized for increased structural integrity

Power Train

See more

Cat Planetary Powershift Transmission

Building your success begins with a best-in-class transmission.

Consistent, smooth shifting and efficiency through integrated electronic controls that utilize Single Clutch Speed Shifting (SCSS).
Long life and reliability through heat treat gear and metallurgy.
Two forward and two reverse speeds to match your application.

Cat Torque Converter (TC) with Lock-up Clutch

Eliminates TC losses while lowering system heat
Improves travel speeds
Increases fuel efficiency

Cat C15 ACERT Engine

The Cat C15 ACERT engine is built and tested to meet your most demanding applications. Two engine options are available that meet Tier 4 Final/Stage IV emission standards or Tier 3/Stage IIIA equivalent emission standards.

Fully integrated electronic engine controls works in concert with the entire machine to make your fuel go farther.
Use less fuel idling with Engine Idle Shutdown.
Maximized durability with Delayed Engine Shutdown.

Operator Station

See more

Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.

Entry and Exit

Enter and exit the cab easily and safely with these newly designed, ergonomic features.

Fold up STIC steer/armrest
Reduced access stairway angles
Standard stairway lighting

Cat Comfort Series III Seat

Enhance comfort and help reduce operator fatigue with Cat Comfort Series III seat.

Mid back design and extra thick, contoured cushions
Air suspension system
Easy-to-reach seat levers and controls for six way adjustments
Seat-mounted implement pod and STIC steer that moves with the seat
76 mm (3 in) wide retractable seat belt

Control Panel

Ergonomic placement of switches and information display keep your operators comfortable all day every day.

Large backlit membrane switches feature LED activation indicators
Switches feature ISO symbols for quick function identification
Two position rocker switch activates the electro hydraulic park brake

Environment

Your operator's productivity is enhanced with our clean, comfortable cab environment.

Experience reduced vibrations from isolation cab mounts and seat air suspension.
Maintain desired cab temperature with automatic temperature controls.
Pressurized cab with filtered air
Reduced sound levels
Convenient floor storage tray/lunch box

Integrated Technologies

See more

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology-equipped machines, you'll get more information and insight into your equipment and operations than ever before. Cat Connect technologies offer improvements in these key areas: Equipment Management – increase uptime and reduce operating costs. Productivity – monitor production and manage job site efficiency. Safety – enhance job site awareness to keep your people and equipment safe.

LINK Technologies

LINK technologies wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performing so you can make timely, fact-based decisions that can boost job site efficiency and productivity.

Product Link™/VisionLink®

Product Link is deeply integrated into your machine, giving you access to timely information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface to help you effectively manage your fleet and lower operating costs. VIMS™ data, like events, histograms, and historical trends, can be downloaded for analysis, giving you the information you need to proactively maintain fleet health and optimize performance and uptime.

DETECT Technologies

DETECT technologies help keep people and equipment safe by enhancing operator awareness of the work area around working equipment and by monitoring and reporting unsafe conditions, like avoidance zones.

Rear Vision Camera

The optional rear vision camera greatly enhances visibility behind the machine to help the operator work more productively. Work with greater confidence and at peak potential while keeping people and assets safe.

COMPACT Technologies

COMPACT technologies combine advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, in fewer passes – saving on fuel and rework.

AccuGrade™ Compaction Control

The dealer-installed AccuGrade system uses the Cat Compaction Algorithm to measure effective compaction value and deliver real-time 3D pass mapping guidance to the cab, indicating where to work and when layers are compacted to optimum density. Pass mapping helps eliminate voids, optimize cell space, and document results. VisionLink 3D Project Monitoring provides landfill managers with detailed compaction analysis to more effectively monitor and manage their operation.

Serviceability

See more

We can help you succeed by ensuring your 826K has design features to reduce your downtime.

Safe and convenient service with ground level or platform access and grouped service points.
Swing-out doors on both sides of the engine compartment provide easy access to important daily service checks.
Ecology drains for ease of service and prevention of potential spills.
Reduce downtime with VIMS™ system notifications so your operators and technicians can resolve any problems before failure.
Quick visual inspection and minimize fluid contamination with sight gauges.
Optional swing-out stairs enable easy access to the engine compartment.
Swing out fuel and hydraulic oil coolers for easy access cleanout.
Ground level power service center with electrical disconnect, emergency engine shutdown, and stairway light switch.
Lighting inside the engine compartment improves visibility to service points.

Customer Support

See more

Legendary Cat Dealer Support

A valued partner, your Cat dealer is available whenever you need them.

Preventive maintenance programs and guaranteed maintenance contracts
Best-in-class parts availability
Improve your efficiency with operator training
Genuine Cat Remanufactured parts

Safety

See more

We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.

Machine Access

Left and right hand stairs are angled to enhance safety for operators getting on and off the 826K.
Continuous pass-through with handrails and non-skid surfaces are designed into the service areas.
Maintain three points of contact at all times through ground level or platform accessible service areas.

Visibility

Optional rearview camera with in-cab monitor increases operator awareness around the machine.
Standard cab mounted LED warning strobes

Operator Environment

Reduced vibrations to the operator with isolated cab mounts and seat mounted implement and steering controls.
Low interior sound levels
Pressurized cab with filtered air
Standard 76 mm (3 in) seat belts on the operator seat
Standard front glass guard

Sustainability

See more

Reducing the Impact to the Environment

The 826K is designed and built with sustainability in mind.

Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
Reduce waste to the environment with our maintenance free batteries.
Built for multiple lives, the Cat 826 is one of the most rebuilt products to achieve the second and third life to get the most value from your investment. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost while benefiting the environment.
Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. And, when you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.

Waste Protection

See more

Guarding

Working in the toughest application, the purpose built 826K Landfill Compactor has specialized waste guarding to protect key components and systems from damage, debris, chemicals, premature wear, or wrapping of the material around components. This additional guarding includes:

Engine and Power Train Guards - Hydraulically actuated guards help prevent trash build-up and shield components.
Front Frame Guards - Front frame guards prevent trash build-up inside the frame. This guard further protects components and hydraulic lines.
Axle Wrapping and Seal Guarding - The guarding prevents material from wrapping and binding around the axles, as well as assist in ease of cleaning.
Major System Guarding and Sight Gauges - Transmission oil tube is guarded to resist damage from debris. The sight gauge for the transmission is visible from ground level. The fuel tank is positioned away from the debris in the front frame and is easily accessed.
Air Inlet Screen - The vertically corrugated, fine mesh, air inlet screen helps reduce trash from entering the radiator area and allows for debris to fall off.
Striker Bars and Optional Cleaner Fingers - Striker bars are located in front of and behind the rear wheels and behind the front wheels. Striker bars help to keep wheels free of debris to assist the wheel step tips in maintaining good compaction. In cohesive material or severe packing conditions, optional cleaner fingers are available to further assist in keeping the wheel step tips clean.
Extended Roof - An oversized roof extends past the cab doors and windows to minimize debris build up.
Under Hood Ventilation System - Creates a neutral pressure environment to prevent trash ingestion from hood openings while providing fresh air to the alternator, electronics and turbo.

Wheels and Tips

See more

New Long Life Paddle and Plus Design Compactor Tips

Providing up to 40% longer life than previous offering. Designed specifically to compliment Cat machines. Improving machine performance!

Longer wear life
Maintaining traction

Three new wheel and tip configurations are available to meet your particular application: 1) Paddle Tip - High performance and less fuel burn with more traction and less weight. 2) Plus Tip - Traditional design for increased side slope stability. 3) Combination Tip - Both paddle and plus tips provide the best compromise of performance and fuel economy with side slope stability.

Operating Costs

See more

Data from customer machines show Cat landfill compactors are among the most fuel efficient machines in the industry. Several features contribute to this excellent fuel efficiency:

ACERT Engine - Advanced engine controls maximizes power and efficiency.
Engine Idle Shutdown - Automatic engine and electrical system shutdown conserves fuel.
Lockup Torque Converter - Transfers more power to the ground and optimizes fuel efficiency in all applications.
Single Clutch Speed Shifting (SCSS) - All new SCSS transmission controls provides greater momentum on grades and fuel savings by carrying that momentum through the shift points.
Fuel Tank Capacity minimum of 12 hours operation depending on the application.

Machine configuration, operator technique, and job site layout can impact fuel consumption. • Machine Configuration - Select the correct blade and wheel configuration based on your individual application.

Equipment

826K Standard Equipment

POWER TRAIN

Single Clutch Speed Shifting (SCSS)
Electronic Clutch Pressure Control (ECPC)
Air to air aftercooler
Brakes, full hydraulic, enclosed, wet multiple disc service brakes
Cat clean emission module (insulated) (Tier 4 Final/Stage IV)
Muffler (under hood) (U.S. EPA Tier 3/EU Stage IIIA equivalent)
Electro-hydraulic parking brake
Engine, Cat C15 with ACERT Technology: – Tier 4 Final/Stage IV – Tier 3/Stage IIIA equivalent
Fuel priming pump (electric)
Fuel to air cooler
Ground level engine shutoff
Heat shield, turbo and exhaust manifold
Hydraulically driven demand fan
Integrated braking system
Radiator, Aluminum Modular (AMR)
Separated cooling system
Starting aid (ether) automatic
Throttle lock
Torque converter with Lock Up Clutch (LUC)
Eco Mode
Transmission, planetary, with 2F/2R speed range control
Under hood ventilation system

ELECTRICAL

Alarm, back-up
Alternator, 150 amp
Batteries, maintenance-free (4 - 1,000 CCA)
Electrical system, 24V
Light, warning unswitched (LED strobe)
Lighting system, halogen (front and rear)
Lighting, access stairway
Lighting, underhood
Starter, electric (heavy duty)
Ground level lockable master disconnect switch
Starting receptacle for emergency start

OPERATOR ENVIRONMENT

Air conditioner with roof mounted condenser
Cab, sound-suppressed pressurized
Internal four-post rollover protective structure (ROPS/FOPS)
Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
12V power port for mobile phone or laptop connection
Radio, CB ready
Coat and hard hat hooks
Hydraulic controls (seat mounted)
Finger tip shifting controls
Flip-up armrest
Heater and defroster
Implement hydraulic lockout
Laminated glass
Light, (dome) cab
Lunch box and beverage holders
Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
Mirror, internal (panoramic)
Mirrors, rearview (externally mounted)
Seat, Cat Comfort (cloth) air suspension
Seat belt with minder, retractable, 76 mm (3 in) wide
STIC control system with lockout
Sun visor, front
Tinted glass
Transmission gear (indicator)
Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles
AccuGrade mapping (ready)
Wet-arm wipers/washers (front and rear)
Intermittent wipers (front and rear)

GUARDS

Guards, axle (front and rear)
Guard, cab window
Guard, driveshaft
Guards, crankcase and power train, hydraulically powered
Striker bars

FLUIDS

Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)

OTHER STANDARD EQUIPMENT

Demand fan/swing out (hydraulic reversible)
Doors, service access (locking)
Ecology drains for engine, radiator, transmission, hydraulic tank
Emergency platform egress
Engine, crankcase, 500 hour interval with CJ-4 oil
Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
Fire suppression ready
Fuel tank, 782 L (207 gal)
Hitch, drawbar with pin
Hoses, Cat XT
Hydraulic, engine, and transmission oil coolers
Total hydraulic filtration system
Oil sampling valves
Oil change system, high speed
Steering, load sensing
Stairway, left and right rear access
Vandalism protection caplocks
Venturi stack
Fold down exhaust stack for shipping

STANDARD ATTACHMENTS

VIMS/Product Link: – GSM, satellite
Engine: – Sound suppression
Precleaner – cab: – Standard or powered
Window: – Standard bonded or rubber-mounted glass
Horn: – Standard or trumpet
Stairs: – Fixed or swingout
Striker bar with cleaner fingers
Blades: – Straight, Semi-U, U
Wheels: – Various tip and wheel arrangements (Paddle and Plus [combination], Paddle, Plus, Chopper [U.S. EPA Tier 3/EU Stage IIIA equivalent], Omission)
Precleaner – engine: – Turbine or dual stage

826K Optional Equipment

ELECTRICAL

Camera, rear vision

OPERATOR ENVIRONMENT

Radio (includes AM/FM, MP3, Bluetooth, hands free microphone)

GUARDS

Guard – rear

STARTING AIDS

Heater, engine coolant, 120V
Heater, engine coolant, 240V

MISCELLANEOUS

Film (ANSI) (HRC)
EU certification (HRC)
Plate – year of manufacture (LRC)

Specifications

Select Units

US
Metric

Overview

Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Introduced in 1978, the 826 has been the industry leader for over 35 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 826K continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.

Engine

Gross Power 435.0 HP 324.0 kW
Net Power 405.0 HP 302.0 kW
Engine Model Cat® C15 ACERT™ Cat® C15 ACERT™
Bore 5.4 in 137.2 mm
Stroke 6.7 in 171.4 mm
Displacement 927.6 in³ 15.2 l
Emissions Tier 4 Final/Stage IV or Tier 3/Stage IIIA equivalent Tier 4 Final/Stage IV or Tier 3/Stage IIIA equivalent
High Idle Speed 2300.0 r/min 2300.0 r/min
Low Idle Speed 800.0 r/min 800.0 r/min
Maximum Altitude - Without Derating (Tier 4 Final/Stage IV) 9298.0 ft 2834.0 m
Maximum Net Torque - 1,300 rpm 1478.8 ft·lbf 2005.0 N·m
Net Power - Converter Drive - Gross Power 435.0 HP 324.0 kW
Net Power - Converter Drive - Torque Rise 8.5 % 8.5 %
Net Power - Direct Drive - Gross Power 412.0 HP 307.0 kW
Net Power - Direct Drive - Torque Rise 33.0 % 33.0 %
Rated Power (Net ISO 9249) 405.0 HP 302.0 kW
Rated Power (Net SAE J1349) 405.0 HP 302.0 kW
Maximum Altitude - Without Derating (Tier 3/Stage IIIA) 9098.0 ft 2773.0 m

Transmission

Transmission Type Planetary - Powershift - ECPC Planetary - Powershift - ECPC
Travel Speed - Forward - Maximum 1st 3.7 mile/h 6.0 km/h
Travel Speed - Forward - Maximum 2nd 6.6 mile/h 10.6 km/h
Travel Speed - Reverse - Maximum 1st 4.3 mile/h 6.9 km/h
Travel Speed - Reverse - Maximum 2nd 7.6 mile/h 12.2 km/h
Travel Speeds - Forward - Maximum Eco Mode 4.3 mile/h 6.9 km/h
Travel Speeds - Reverse - Maximum Eco Mode 4.6 mile/h 7.4 km/h

Hydraulic System

Bore 4.7 in 120.0 mm
Lift System Double Acting Cylinder Double Acting Cylinder
Main Relief Pressure 3495.0 psi 24100.0 kPa
Maximum Supply Pressure 3495.0 psi 24100.0 kPa
Pump Flow at 1,950 rpm 30.9 gal/min 117.0 l/min
Stroke 42.1 in 1070.0 mm

Axles

Front Planetary - Fixed Planetary - Fixed
Oscillation Angle ±5° ±5°
Rear Planetary - Oscillating Planetary - Oscillating

Brakes

Parking Brake Drum and Shoe, Spring Applied, Hydraulic Released Drum and Shoe, Spring Applied, Hydraulic Released

Service Refill Capacities

Fuel Tank 206.6 gal (US) 782.0 l
Cooling System 30.6 gal (US) 116.0 l
Transmission 17.4 gal (US) 66.0 l
Differential - Final Drives - Front 26.4 gal (US) 100.0 l
Differential - Final Drives - Rear 29.1 gal (US) 110.0 l
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV) 8.5 gal (US) 32.0 l
Engine Crankcase 9.0 gal (US) 34.0 l
Hydraulic Tank Only 35.4 gal (US) 134.0 l

Weights

Operating Weight 90207.0 lb 40917.0 kg

Cab - Standard

Machine Sound Power Level (ISO 6395) 113.0 dB(A) 113.0 dB(A)
Operator Sound Pressure Level - ISO 6396 73.0 dB(A) 73.0 dB(A)

Cab - Suppression

Machine Sound Power Level (ISO 6395) 110.0 dB(A) 110.0 dB(A)
Operator Sound Pressure Level - ISO 6396 72.0 dB(A) 72.0 dB(A)

Operating Specifications

Maximum Operating Weight (Tier 4 Final/Stage IV) - Multiple Blade and Wheel Offerings 90207.0 lb 40917.0 kg
Maximum Operating Weight (Tier 3 Final/Stage IIIA equivalent) Multiple Blade and Wheel Offerings 89186.0 lb 40454.0 kg

Dimensions (Approximate)

Height - Top of Cab with A/C 14.99 ft 4568.0 mm
Height - Top of Exhaust Pipe 14.56 ft 4439.0 mm
Height - Top of Hood 10.87 ft 3312.0 mm
Ground Clearance - Bumper 3.15 ft 960.0 mm
Hitch to Centerline of Front Axle 6.07 ft 1850.0 mm
Wheel Base 12.14 ft 3700.0 mm
Width - Over Wheels 12.47 ft 3800.0 mm
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard 10.16 ft 3096.0 mm
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard 9.38 ft 2860.0 mm
Height - ROPS/Canopy 14.02 ft 4274.0 mm
Height - Top of Cab with Strobe 15.63 ft 4765.0 mm
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard 28.59 ft 8715.0 mm
Turning Radius - Inside of Wheels 9.18 ft 2797.0 mm
Ground Clearance 2.11 ft 642.0 mm

Hydraulic System - Steering

Bore 4.5 in 114.3 mm
Maximum System Flow 170 L/min @ 1,950 rpm (44.9 gal/min @ 1,950 rpm) 170 L/min @ 1,950 rpm (44.9 gal/min @ 1,950 rpm)
Steering Pressure Limited 3481.0 psi 24000.0 kPa
Steering System - Circuit Double Acting - End Mounted Double Acting - End Mounted
Steering System - Pump Piston - Variable Displacement Piston - Variable Displacement
Stroke 22.7 in 576.0 mm
Vehicle Articulation Angle 86.0 ° 86.0 °

Wheels and Tips

Attachment - Wheels: 1200 mm (47.25 in) Paddle Tips - Drum Diameter 5.28 ft 1610.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Paddle Tips - Drum Width 3.94 ft 1200.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Paddle Tips - Outside Diameter 6.47 ft 1971.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Paddle Tips - Tips per Wheel 30 30
Attachment - Wheels: 1200 mm (47.25 in) Paddle Tips - Weight 20540.0 lb 9317.0 kg
Attachment - Wheels: 1200 mm (47.25 in) Paddle Tips - Width over Drums 12.47 ft 3800.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Paddle and Plus Tips - Drum Diameter 5.28 ft 1610.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Paddle and Plus Tips - Drum Width 3.94 ft 1200.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Paddle and Plus Tips - Outside Diameter 6.47 ft 1971.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Paddle and Plus Tips - Tips per Wheel 30 30
Attachment - Wheels: 1200 mm (47.25 in) Paddle and Plus Tips - Weight 21125.0 lb 9582.0 kg
Attachment - Wheels: 1200 mm (47.25 in) Paddle and Plus Tips - Width over Drums 12.47 ft 3800.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Plus Tips - Drum Diameter 5.28 ft 1610.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Plus Tips - Drum Width 3.94 ft 1200.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Plus Tips - Outside Diameter 6.47 ft 1971.0 mm
Attachment - Wheels: 1200 mm (47.25 in) Plus Tips - Tips per Wheel 30 30
Attachment - Wheels: 1200 mm (47.25 in) Plus Tips - Weight 22002.0 lb 9980.0 kg
Attachment - Wheels: 1200 mm (47.25 in) Plus Tips - Width over Drums 12.47 ft 3800.0 mm

826K

826K

View Product Downloads

Benefits & Features

Efficiency and Productivity

See more

Efficiency with Eco Mode

Decelerator Pedal

Steering and Transmission Integrated Control System (STIC™)

Steering System

Electro Hydraulic Controls

Structures

See more

Robust Structures

Power Train

See more

Cat Planetary Powershift Transmission

Cat Torque Converter (TC) with Lock-up Clutch

Cat C15 ACERT Engine

Operator Station

See more

Entry and Exit

Cat Comfort Series III Seat

Control Panel

Environment

Integrated Technologies

See more

LINK Technologies

Product Link™/VisionLink®

DETECT Technologies

Rear Vision Camera

COMPACT Technologies

AccuGrade™ Compaction Control

Serviceability

See more

We can help you succeed by ensuring your 826K has design features to reduce your downtime.

Customer Support

See more

Legendary Cat Dealer Support

Safety

See more

Machine Access

Visibility

Operator Environment

Sustainability

See more

Reducing the Impact to the Environment

Waste Protection

See more

Guarding

Wheels and Tips

See more

New Long Life Paddle and Plus Design Compactor Tips

Operating Costs

See more

Equipment

826K Standard Equipment

826K Optional Equipment

Related Products

Attachments

Specifications

Overview

Engine

Transmission

Hydraulic System

Axles

Brakes

Service Refill Capacities

Weights

Cab - Standard

Cab - Suppression

Operating Specifications

Dimensions (Approximate)

Hydraulic System - Steering

Wheels and Tips

Customer Stories

Promotions

Social

Branch Locator

Services