Menu

7295

Select Units

Overview

7295 Electric Rope Shovel

Dimensions

  • Dipper Payload 50.0 Sh Ton 45.0 t
  • Dipper Capacity 19.1-38.2 m3 (25-50 yd3) 19.1-38.2 m3 (25-50 yd3)
  • Note Dependent on application and material density. Dependent on application and material density.

Weights

  • Working Weight - With Dipper and Standard Links 1748837.0 lb 793259.0 kg
  • Ballast - Furnished By Customer 352000.0 lb 159665.0 kg
  • Note (1) These weights will vary slightly depending upon dipper and optional equipment selection. These weights will vary slightly depending upon dipper and optional equipment selection.
  • Note (2) All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.

Main Structures

  • Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard 28.22 in 8.6 cm
  • Ground Bearing Pressure Ground bearing pressure is dependent upon many factors. Ground bearing pressure is dependent upon many factors.
  • Ground Bearing Pressure - 182.9 cm (72 in) Treads 39.0 in 269.0 cm
  • Ground Bearing Pressure - Total Effective Bearing Area 315.6 ft² 29.3 m²
  • Hoist A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.
  • Planetary Propel Dual-motor independent drive. Dual-motor independent drive.
  • Swing Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
  • Upper Works Overall Width - Including Standard Walkways 41.33 in 12.6 cm

Optimal Working Ranges*

  • Cutting Height - Maximum 45.0 ft 13.7 m
  • Cutting Radius - Maximum 67.59 ft 20.6 m
  • Dumping Height - With Clearance to Open Dipper Door 27.56 ft 8.4 m
  • Note (1) Optimal working ranges based on loading a Cat® 785D truck. Optimal working ranges based on loading a Cat® 785D truck.
  • Note (2) *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
  • Radius of Level Floor 48.88 ft 14.9 m
  • Revolving Frame Tail Swing Radius 25.59 in 7.8 m

Lube System

  • Components (1) 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
  • Type Automatic, single-line system for open gear lubricant and grease. Automatic, single-line system for open gear lubricant and grease.
  • Components (2) External fast fill from lower level. External fast fill from lower level.

Electrical

  • Drive IGBT Acutrol drive system. IGBT Acutrol drive system.
  • Note Other voltages available to suit customer requirements. Other voltages available to suit customer requirements.
  • Power Requirements - 50 Hz 6,000V, 6,600V, 7,200V 6,000V, 6,600V, 7,200V
  • Power Requirements - 60 Hz 4,160V, 7,200V 4,160V, 7,200V
  • Power Requirements - Average Power Demand 538-753 kW (721-1,010 hp) 538-753 kW (721-1,010 hp)
  • Power Requirements - Peak power 2886.0 HP 2152.0 kW
  • Power Requirements - Voltage 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V

Front End

  • Components One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
  • Crowd Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
  • Note High impact ropes available as an option High impact ropes available as an option
  • Standard Rope Data - Boom Suspension - Diameter 2.75 in 70.0 mm
  • Standard Rope Data - Boom Suspension - No. 4 4
  • Standard Rope Data - Crowd - Diameter 2.25 in 57.0 cm
  • Standard Rope Data - Crowd - No. 1 1
  • Standard Rope Data - Dipper Trip - Diameter 0.625 in 16.0 mm
  • Standard Rope Data - Dipper Trip - No. 1 1
  • Standard Rope Data - Hoist - Diameter 2.375 in 60.0 mm
  • Standard Rope Data - Hoist - No. 2 2
  • Standard Rope Data - Retract - Diameter 2.25 in 57.0 mm
  • Standard Rope Data - Retract - No. 1 1

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!