Menu

930M Ag Handler

Making Your Choice Easy:

  • Enjoy All Day Comfort – Have a seat in the new 930M Ag Handler and enjoy automatic temperature control, class leading sound levels, excellent all around visibility and low-effort joystick controls that move with you on a fully adjustable seat suspension. A large spacious operator environment combined with Caterpillar's exclusive hydraulic cylinder damping and smooth predictable controls make this the most comfortable seat on the farm.
  • Work Made Easy – Move more with Caterpillar's patented quick loading Performance Series buckets and High Lift optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar with tool carrier capabilities. The parallel lift and high tilt forces throughout the working range allow you to safely and confidently handle loads from bales to silage with precise control. Multi-function work has never been easier with dedicated pumps for each system and a flow sharing implement valve governed by an intelligent power management system. Simultaneously lift, steer and drive without compromise. A 20% boost in hydraulic speeds on the Ag Handler helps you finish the day on time.
  • Efficiently Powerful – Experience hybrid-like fuel efficiency with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed of just 1,600 rpm in Standard Mode. Power when you need it with Caterpillar's exclusive Power‑by-Range technology that increases power in Range 4 for improved speed on grade. For your toughest and most demanding farm applications a new Performance Mode will allow you to boost the power and hydraulic speed in all Ranges to get the job done even quicker. Meets U.S. EPA Tier 4 Final emission standards with a Cat® C7.1 engine that is designed to manage itself so you can concentrate on your work.
  • Customize Your Experience – Fine tune machine performance with adjustments at your fingertips through the soft touch buttons and optional secondary touch screen display. Quickly set auxiliary flow to optimize grapple or silage defacer speed, enable auto reversing fan to breathe clean in dusty environments, toggle over to fine mode for improved control when bale stacking, program linkage kick-out positions for easy feed wagon loading, adjust wheel torque to match underfoot conditions when cleaning corrals and customize ride control activation speed for a smooth loaded carry run. The 930M Ag Handler is ready for the challenge on your farm!

Select Units

Overview

930M Ag Handler

Engine

  • Maximum Gross Power 164.0 HP 122.0 kW
  • Engine Model Cat® C7.1 Cat® C7.1
  • Maximum Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) 162.0 HP 119.0 kW
  • Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) 160.0 HP 119.0 kW
  • Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) 1600.0 r/min 1600.0 r/min
  • Rated Net Power - 1,600 rpm - ISO 9249 (DIN) (Standard Power Mode: Speed Range 1-3*) 158.0 HP 116.0 kW
  • Rated Net Power - 1,600 rpm - SAE J1349 (Standard Power Mode: Speed Range 1-3*) 154.0 HP 115.0 kW
  • Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*) 141.0 HP 105.0 kW
  • Displacement (Performance Power Mode: Speed Range 1-4) 427.0 in³ 7.01 l
  • Displacement (Standard Power Mode: Speed Range 1-3*) 427.0 in³ 7.01 l
  • Emissions Engine meets U.S. EPA Tier 4 Final emission standards. Engine meets U.S. EPA Tier 4 Final emission standards.
  • Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) 166.0 HP 122.0 kW
  • Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) 164.0 HP 122.0 kW
  • Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) 1800.0 r/min 1800.0 r/min
  • Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) 592.0 ft·lbf 804.0 N·m
  • Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) 592.0 ft·lbf 804.0 N·m
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4) 572.0 ft·lbf 776.0 N·m
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*) 572.0 ft·lbf 776.0 N·m
  • Maximum Net Torque - SAE J1349 (Performance Power Mode; Speed Range 1-4) 566.0 ft·lbf 768.0 N·m
  • Maximum Net Torque - SAE J1349 (Standard Power Mode; Speed Range 1-3*) 566.0 ft·lbf 768.0 N·m
  • Note (1) Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter. Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
  • Note (2) Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350. Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
  • Note (3) *Range 4 power is boosted to be the same as Performance Mode. *Range 4 power is boosted to be the same as Performance Mode.
  • Rated Net Power - 1,800 rpm - ISO 9249 (DIN) (Performance Power Mode: Speed Range 1-4) 162.0 HP 119.0 kW
  • Rated Net Power - 1,800 rpm - SAE J1349 (Performance Power Mode: Speed Range 1-4) 157.0 HP 117.0 kW
  • Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4) 143.0 HP 107.0 kW

Buckets

  • Bucket Capacities 3.1-5.0 m3 (4.0-6.5 yd3) 3.1-5.0 m3 (4.0-6.5 yd3)
  • Bucket Capacities - Light Material 3.1-5.0 m3 (4.0-6.5 yd3) 3.1-5.0 m3 (4.0-6.5 yd3)

Weights

  • Operating Weight 31876.0 lb 14459.0 kg

Cab

  • ROPS ISO 3471:2008 ISO 3471:2008
  • FOPS ISO 3449:2005 Level II ISO 3449:2005 Level II
  • Note (1) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
  • Note (2) *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Axles

  • Front Fixed; Locking differential (standard) Fixed; Locking differential (standard)
  • Rear Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional) Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Dimensions and Operating Specifications (Approximate) - 3.1 m³ (4.1 yd³) Bucket

  • Articulation Angle 40 degrees 40 degrees
  • Breakout* 18808.0 lb 8532.0 kg
  • Carry Height - Bucket Pin 2.0 ft 613.0 mm
  • Clearance - Bucket at 45° * 10.42 ft 3177.0 mm
  • Clearance - Level Bucket** 13.33 ft 4073.0 mm
  • Clearance - Loadover Height** 11.58 ft 3550.0 mm
  • Departure Angle 33 degrees 33 degrees
  • Dig Depth** 5.3 in 135.0 mm
  • Dump Angle at Full Lift 44 degrees 44 degrees
  • Height - Bucket Pin** 14.42 ft 4400.0 mm
  • Height - Ground Axle Center** 2.17 ft 685.0 mm
  • Height - Ground Clearance** 1.25 ft 397.0 mm
  • Height - Ground to Beacon** 12.08 ft 3707.0 mm
  • Height - Ground to Cab** 10.92 ft 3340.0 mm
  • Height - Overall** 18.67 ft 5697.0 mm
  • Length - Hitch to Front Axle 4.92 ft 1500.0 mm
  • Length - Overall* 27.25 ft 8323.0 mm
  • Length - Rear Axle to Bumper 6.5 ft 1993.0 mm
  • Length - Wheel Base 9.83 ft 3000.0 mm
  • Note (1) *Vary with bucket. *Vary with bucket.
  • Note (2) **Vary with tire. **Vary with tire.
  • Note (3) Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires. Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
  • Operating Weight* 31876.0 lb 14459.0 kg
  • Rack Angle at Carry 48 degrees 48 degrees
  • Rack Angle at Full Lift 51 degrees 51 degrees
  • Reach - Bucket at 45°* 4.42 ft 1350.0 mm
  • Tipping Load - Full Turn - ISO 14397-1* 13934.0 lb 6320.0 kg
  • Tipping Load - Straight - ISO 14397-1* 16430.0 lb 7453.0 kg
  • Turning Radius - Inside of Tires 9.33 ft 2851.0 mm
  • Turning Radius - Outside of Tires 17.67 ft 5402.0 mm
  • Turning Radius - Over Bucket 20.92 ft 6392.0 mm
  • Width - Bucket 9.0 ft 2750.0 mm
  • Width - Over Tires 8.33 ft 2540.0 mm
  • Width - Tread Center 6.25 ft 1930.0 mm

Dimensions and Operating Specifications (Approximate) - 3.5 m³ (4.6 yd³) Bucket

  • Articulation Angle 40 degrees 40 degrees
  • Breakout* 17246.0 lb 7823.0 kg
  • Carry Height - Bucket Pin 2.0 ft 613.0 mm
  • Clearance - Bucket at 45° * 10.17 ft 3107.0 mm
  • Clearance - Level Bucket** 13.33 ft 4073.0 mm
  • Clearance - Loadover Height** 11.58 ft 3550.0 mm
  • Departure Angle 33 degrees 33 degrees
  • Dig Depth** 5.3 in 135.0 mm
  • Dump Angle at Full Lift 44 degrees 44 degrees
  • Height - Bucket Pin** 14.42 ft 4400.0 mm
  • Height - Ground Axle Center** 2.17 ft 685.0 mm
  • Height - Ground Clearance** 1.25 ft 397.0 mm
  • Height - Ground to Beacon** 12.08 ft 3707.0 mm
  • Height - Ground to Cab** 10.92 ft 3340.0 mm
  • Height - Overall** 19.0 ft 5802.0 mm
  • Length - Hitch to Front Axle 4.92 ft 1500.0 mm
  • Length - Overall* 27.58 ft 8425.0 mm
  • Length - Rear Axle to Bumper 6.5 ft 1993.0 mm
  • Length - Wheel Base 9.83 ft 3000.0 mm
  • Note (1) *Vary with bucket. *Vary with bucket.
  • Note (2) **Vary with tire. **Vary with tire.
  • Note (3) Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires. Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
  • Operating Weight* 32136.0 lb 14577.0 kg
  • Rack Angle at Carry 48 degrees 48 degrees
  • Rack Angle at Full Lift 51 degrees 51 degrees
  • Reach - Bucket at 45°* 4.67 ft 1424.0 mm
  • Tipping Load - Full Turn - ISO 14397-1* 13592.0 lb 6166.0 kg
  • Tipping Load - Straight - ISO 14397-1* 16070.0 lb 7290.0 kg
  • Turning Radius - Inside of Tires 9.33 ft 2851.0 mm
  • Turning Radius - Outside of Tires 17.67 ft 5402.0 mm
  • Turning Radius - Over Bucket 21.92 ft 6427.0 mm
  • Width - Bucket 9.0 ft 2750.0 mm
  • Width - Over Tires 8.33 ft 2540.0 mm
  • Width - Tread Center 6.25 ft 1930.0 mm

Loader Hydraulic System

  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height 1.4 s 1.4 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level 1.8 s 1.8 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift 4.3 s 4.3 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time 7.5 s 7.5 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height 1.6 s 1.6 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level 1.8 s 1.8 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift 4.8 s 4.8 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time 8.2 s 8.2 s
  • Maximum Flow - Implement Pump 50.0 gal/min 190.0 l/min
  • Maximum Flow - Implement Pump - 3rd Function* 50.0 gal/min 190.0 l/min
  • Maximum Flow - Implement Pump - 4th Function Maximum Flow* 42.0 gal/min 160.0 l/min
  • Maximum Working Pressure - Implement Pump 4061.0 psi 28000.0 kPa
  • Note *Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped. *Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
  • Relief Pressure - Tilt Cylinder 4351.0 psi 30000.0 kPa
  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 4061.0 psi 28000.0 kPa
  • Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 4061.0 psi 28000.0 kPa

Service Refill Capacities

  • Axles - Front 6.9 gal (US) 26.0 l
  • Axles - Rear 6.6 gal (US) 25.0 l
  • Cooling System 7.9 gal (US) 30.0 l
  • Diesel Exhaust Fluid (DEF) Tank 5.0 gal (US) 19.0 l
  • Engine Crankcase 5.3 gal (US) 20.0 l
  • Fuel Tank 51.5 gal (US) 195.0 l
  • Hydraulic System - Including Tank 43.6 gal (US) 165.0 l
  • Hydraulic Tank 23.8 gal (US) 90.0 l
  • Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Transmission - Gear Box 2.2 gal (US) 8.5 l

Steering

  • Maximum Flow - Steering Pump 34.0 gal/min 130.0 l/min
  • Maximum Steering Torque - 0° (Straight Machine) 37155.0 ft·lbf 50375.0 N·m
  • Maximum Steering Torque - 40° (Full Turn) 27747.0 ft·lbf 37620.0 N·m
  • Maximum Working Pressure - Steering Pump 3500.0 psi 24130.0 kPa
  • Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.5 turns 3.5 turns
  • Steering Articulation Angle - Each Direction 40° 40°
  • Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed 2.4 s 2.4 s

Tires

  • Note (1) Other tire choices are available. Contact your Cat dealer for details. Other tire choices are available. Contact your Cat dealer for details.
  • Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
  • Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Other Choices Include 20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3) 20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
  • Standard Size 20.5 R25, radial (L-3) 20.5 R25, radial (L-3)

Transmission

  • Forward and Reverse - Range 1* 1-13 km/h (0.6-8 mph) 1-13 km/h (0.6-8 mph)
  • Forward and Reverse - Range 2 8.0 mile/h 13.0 km/h
  • Forward and Reverse - Range 3 17.0 mile/h 27.0 km/h
  • Forward and Reverse - Range 4 25.0 mile/h 40.0 km/h
  • Note *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph). *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).

930M Ag Handler Standard Equipment

POWER TRAIN

  • Auto idle shut down feature
  • Cat C7.1 engine
    • Power modes (Standard and Performance)
    • Power by range (High Power in Range 4)
    • Turbocharged and aftercooled
    • Filtered crankcase breather
    • Diesel particulate filter
    • Selective Catalyst Reduction
  • Coded start (requires secondary display)
  • Coolant protection to –34° C (–29° F)
  • Enclosed wet disc full hydraulic brakes
  • Fuel priming pump, automatic
  • Hydraulically driven demand cooling fan
  • Hydrostatic transmission with electronic control
    • Operator modes (Default, TC, Hystat™, and Ice)
    • Directional Shift Aggressiveness (fast, medium, slow)
    • Rimpull control, adjust wheel torque
    • Creeper control, adjust ground speed
  • Locking differential front axle – on the go engagement with “Always ON” feature
  • Parking brake, electric
  • Single plane cooling package wide six fins per inch density
  • Throttle lock and max speed limiter

HYDRAULICS

  • Automatic lift and bucket kickouts, adjustable in-cab
  • Bucket and fork modes, adjustable in-cab
  • Cylinder damping at kickout and mechanical end stops
  • Fine mode control (fast, medium, slow) in fork mode
  • Hydraulic response setting (fast, medium, slow)
  • Hydraulic diagnostic connectors and S·O·SSM ports
  • Load sensing hydraulics and steering

ELECTRICAL

  • Alternator, 115 amp, heavy duty
  • 12V power supply in cab (2)
  • Batteries, 1,000 CCA (2) 24V system, disconnect switch
  • Back-up alarm
  • Debris package (reversing fan)
  • Emergency shutdown switch
  • Halogen work and roading lights, LED rear tail lights
  • Product Link™ PRO
  • Remote jump start post
  • Resettable main and critical function breakers

OPERATOR ENVIRONMENT

  • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
  • Automatic temperature control
  • External heated mirrors with lower parabolic
  • Hydraulic control lockout
  • Interior cab lighting, door and dome
  • Interior rearview mirrors (2)
  • Lunch box storage
  • Radio ready speakers
  • Rear window defrost, electric
  • Seat-mounted electronic implement controls, adjustable
  • Column mounted multi function control – lights, wipers, turn signal
  • Tilt and telescopic steering wheel
  • Tinted front glass
  • Wet arm wiper/washer, 2-speed and intermittent, front

OTHER STANDARD EQUIPMENT

  • High Lift linkage
  • Large-access enclosure doors with adjustable close/open force
  • Parallel Lift loader linkage

930M Ag Handler Optional Equipment

OPTIONAL EQUIPMENT

  • Auto lube, integrated in secondary display
  • Auxiliary flow, third and fourth function, adjustable through secondary display
  • Auxiliary tool box
  • Beacon light, strobe
  • Cab, deluxe
    • Electrically adjustable external heated mirrors (2)
    • Secondary touch screen display to enable features and adjust parameters
    • Sunscreen, front and rear
    • Windshield washing access steps
  • Camera, rearview
  • Cat Production Measurement weigh scale system integrated into secondary display
  • Cold start package
  • Coupler, (Fusion and ISO 23727)
  • Fenders (extended cover and full coverage)
  • Guarding (machine and operator)
  • Guarding (power train and light)
  • Lights, auxiliary, halogen or LED with engine compartment lights
  • Limited slip rear axle
  • Object Detection
  • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
  • Radio packages
  • Ride Control System, adjustable through secondary display
  • Seats
    • Deluxe seat – fully adjustable fabric air suspension seat with mid backrest and mechanical lumbar support
    • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
  • Steering
    • Dual mode and secondary
  • Tire Pressure Monitoring (TPM) integrated into secondary display

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!