Menu

C280

A3 ECU - Advantages

CAN J1939 data link Waterproof connectors, Maintenance-free, Backup ECU for redundant governing

A3 ECU - Electronic Advantages

Load feedback, Programmable droop, Adjustable gain, Adjustable fuel/air ratio control, Histograms of engine operation, Cat Messenger display presents diagnostics and other engine parameters

A3 ECU - Data Advantages through J1939 Link

Engine speed, Boost pressure, Throttle position, Fuel consumption rate, Inlet manifold temperature, Diagnostic codes and events, Configuration, Desired engine speed, Battery voltage, Engine load, Lifetime totals — engine hours, fuel burned, idle fuel, idle hours, Trip totals — average fuel rate, idle fuel, idle hours, engine hours, fuel burned, trip reset

Customer Interface Panel

Interfaces with standard Cat® Marine Monitoring System (PLC in Price List) Provides visual indication of ECU functionality, Accepts 4 — 20 mA or PWM remote throttle speed input, Marine alarm and protection

Electronic Unit Injectors

“Drop-in” installation, No threaded fuel connections, High pressure inside injector only, Does not require double wall fuel lines or leak collection device, Injector synchronization not required

Select Units

Overview

Power Rating

  • Minimum Rating 2320.0 BHP 1730.0 bkW
  • Maximum Rating 7268.0 BHP 5420.0 bkW

Engine Specifications

  • Aspiration TA TA
  • Bore 11.0 in 280.0 mm
  • Configuration In-Line 6, Vee 8, Vee 12, Vee 16, 4-Stroke-Cycle Diesel In-Line 6, Vee 8, Vee 12, Vee 16, 4-Stroke-Cycle Diesel
  • Stroke 11.8 in 300.0 mm

Dimensions & Weights

  • Maximum Dry Weight 62832.0 lb 28500.0 kg
  • Maximum Height 140.0 in 3550.0 mm
  • Maximum Length 197.0 in 5007.0 mm
  • Maximum Width 69.0 in 1741.0 mm
  • Minimum Dry Weight 34496.0 lb 15680.0 kg
  • Minimum Height 108.0 in 2733.0 mm
  • Minimum Length 145.0 in 3691.0 mm
  • Minimum Width 67.0 in 1704.0 mm

C280 Standard Equipment

AIR INLET SYSTEM

  • R INLET SYSTEM Aftercooler, fresh water, corrosion resistant coated (air side) Air inlet shutoff Breather, crankcase, top-mounted Turbocharger, rear-mounted, engine oil lubricated

CONTROL SYSTEM

  • Single Caterpillar A-III Electronic Engine Control Modules with Electronic Unit Injector Fuel System Rigid Wiring Harness (10 amp 24volt power required to drive Electronic Engine Control Modules)

COOLING SYSTEM

  • Engine coolant water drains

EXHAUST SYSTEM

  • Dry, gas tight, exhaust manifold

FUEL SYSTEM

  • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38 degrees C) Fuel transfer pump (mounted on left hand side) Duplex fuel filters Electronically Controlled Unit Injectors

LUBE SYSTEM

  • Centrifugal oil filters with single shutoff. Service side engine mounted on cylinder block inspection covers. Includes installed oil lines and single shutoff valve. Filters centrifuge bypass oil from the main lubricating oil pump. Can be serviced with the

GENERAL

  • Paint, Caterpillar yellow Pumps, gear driven: fuel, oil, jacket water, aftercooler/oil cooler water

SVCE TOOLS/SHIP PROT/FACTORY SUPPORT

  • Service literature. Included standard with each engine are two (2) complete sets of service literature listed below: 1. Custom parts book CD (serial number specific) 2. Service manual, which includes: Operation & Maintenance, Specifications, Systems Opera

C280 Optional Equipment

AIR INLET SYSTEM

  • Air Cleaners

COOLING SYSTEM

  • Jacket Water Heaters
  • Heat Recovery System
  • Heat Recovery Thermostats
  • Cooling System Connection Groups
  • De-Aerator

CONTROL SYSTEM

  • Load Sharing module
  • Direct Rack Module

EXHAUST SYSTEM

  • Outlet Expander
  • Flexible Exhaust Fittings
  • Weld Flange - Optional

FUEL SYSTEM

  • Fuel Priming Pump
  • Duplex Primary Fuel Strainer
  • Fuel System Connections

LUBE SYSTEM

  • Oil Pan Drain Valve
  • Prelubrication Connections
  • Lube Oil Heater

MOUNTING SYSTEM

  • Vibration Isolators

MARINE SOCIETY REQUIREMENTS

  • Spray shielding

PROTECTION SYSTEM

  • PLC Monitoring System Options
  • ECP Relay System Options
  • ECP Mechanical Gauge Instrument Panel
  • Turbocharger Speed Sensor
  • Cylinder Pressure Relief Valve
  • Oil Mist Detector
  • Protection System Components
  • Magnetic Pickup

SPARE PART KITS

  • Intake and Air System
  • Basic Engine
  • Cylinder Head
  • Fuel System
  • Cooling System
  • Instrumentation
  • Cylinder Valve Kits

ENGINE TESTING

  • Basic System Testing
  • Special Witness Test
  • Torsional Vibration Analysis

SERVICE TOOLS / SHIPPING PROTECTION / FACTORY SUPPORT

  • Commissioning
  • Service Tools
  • Factory Packaging
  • Shipping Protection-Shrink Wrap or Tarp
  • Shipping Protection-Export Boxing
  • AID Emblem
  • Storage Preservation

Customer Stories

Discover what’s new and how customers like you are benefiting from our products and services. Check back often for updates.

Promotions

Looking for that perfect piece of used equipment to complement your fleet? Check out our Used Exclusives, featuring new machines every week!

Social

Let’s talk. Connect with us on one of our social channels to start the conversation and see what we’re up to.

Branch Locator

Looking for your nearest branch? Get in touch with us today by contacting one of our branches directly. We’re always ready to help.

Services

When you choose Finning, you have a wide array of support and specialty services to help you get the most from your equipment.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Choose from a range of financing solutions that allow you to purchase equipment, parts, services, and technology when you need it.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!