Menu

986K

986K Standard Equipment

ELECTRICAL

  • Alarm, back-up
  • Alternator, single 145 amp
  • Batteries, dry
  • Converter, 10/15 amp, 24V to 12V
  • Lighting system (halogen, work lights, access and service platform lighting)
  • Starting and charging system, 24V
  • Starter emergency start receptacle

OPERATOR ENVIRONMENT

  • Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
  • Air conditioner
  • Rear vision camera system
  • Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
  • Controls, lift and tilt function
  • Heater, defroster
  • Horn, electric
  • Instrumentation, gauges: – Coolant temperature – Fuel level – DEF level – Hydraulic oil temperature – Power train oil temperature
  • Light, cab, dome
  • Lunchbox, beverage holders
  • Mirrors, rearview (externally mounted)
  • Seat, Cat Comfort (cloth), air suspension, six-way adjustable
  • Seat belt minder
  • Seat belt, retractable, 76 mm (3 in) wide
  • STIC Control System
  • UV glass
  • Transmission gear indicator
  • Wet-Arm wipers/washers (front and rear): – Intermittent front and rear wipers
  • Lights, directional

POWER TRAIN

  • Brakes, oil-cooled, multi-disc, service/secondary
  • Case drain screens
  • Crankcase guard
  • Electro hydraulic parking brake
  • Engine, C15 ACERT MEUI diesel, turbocharged/aftercooled
  • Ground level engine shutoff
  • Turbine precleaner, engine air intake
  • Starting aid, ether, automatic
  • Torque converter, Neutralizer
  • Transmission, planetary powershift, 4F/3R electronic control
  • Manual switch and automatic fuel priming
  • Cat Production Measurement ready

OTHER

  • Automatic bucket lift kickout/positioner
  • Hydraulically driven demand fan
  • Couplings, Cat O-ring face seals
  • Doors, service access (locking)
  • Ecology drains for engine, radiator, hydraulic tank
  • Fuel tank, 535 L (141 gal)
  • Hitch, drawbar with pin
  • Hoses, Cat XT™
  • Hydraulic, steering and brake filtration/screening system
  • Cat Clean Emission Module
  • Oil sampling valves
  • Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
  • Rear access to cab and service platform
  • Steering, load sensing
  • Toe kicks
  • Vandalism protection caplocks

986K Optional Equipment

POWER TRAIN

  • –50° C (–58° F) antifreeze
  • Engine oil change system, high speed, Wiggins
  • Engine block heater 120V or 240V
  • High ambient cooling – software
  • Cat Production Measurement

MISCELLANEOUS ATTACHMENTS

  • Front and rear roading fenders
  • Fast fill fuel system (Shaw-Aero)
  • Cold Weather Starting (extra two batteries)
  • Aggregate Handler

OPERATOR ENVIRONMENT

  • Cab powered precleaner
  • Cat Detect Vision
  • AM/FM/CD/MP3 radio
  • Satellite Sirius radio with Bluetooth
  • LED warning strobe
  • CB radio ready
  • Window pull down visor
  • Handrail mounted mirrors

Select Units

Overview

Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The new 986K builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.

Engine

  • Net Power 373.0 HP 278.0 kW
  • Engine Model Cat® C15 ACERT™ Cat® C15 ACERT™
  • Bore 5.4 in 137.0 mm
  • Stroke 6.75 in 171.5 mm
  • Displacement 927.0 in³ 15.2 l
  • Emissions U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, and Brazil MAR-1 U.S. EPA Tier 4 Final/EU Stage IV, China Nonroad Stage III, and Brazil MAR-1
  • Gross Power - ISO 14396 449.0 HP 335.0 kW
  • Peak Power Speed - 1,600 rpm - SAE J1995 456.0 HP 340.0 kW
  • Peak Power Speed - 1,600 rpm - SAE J1995 (DIN) 462.0 HP 340.0 kW
  • Peak Torque - 1,200 rpm - SAE J1995 1778.0 lb/ft 2411.0 N·m
  • Torque Rise 16% 16%
  • Peak Power Speed - 1,600 rpm - ISO 14396 449.0 HP 335.0 kW
  • Peak Power Speed - 1,600 rpm - ISO 14396 (DIN) 455.0 HP 335.0 kW
  • Rated Speed - 2,000 rpm - EEC 80/1269 373.0 HP 278.0 kW
  • Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) 378.0 HP 278.0 kW
  • Rated Speed - 2,000 rpm - ISO 9249 373.0 HP 278.0 kW
  • Rated Speed - 2,000 rpm - ISO 9249 (DIN) 378.0 HP 278.0 kW
  • Rated Speed - 2,000 rpm - SAE J1349 373.0 HP 278.0 kW
  • Rated Speed - 2,000 rpm - SAE J1349 (DIN) 378.0 HP 278.0 kW

Operating Specifications

  • Operating Weight 98806.0 lb 44818.0 kg
  • Bucket Capacity Range 5-10.3 m3 (6.5-13.5 yd3) 5-10.3 m3 (6.5-13.5 yd3)
  • Cat Truck Match - High Lift 772/773 772/773
  • Cat Truck Match - Standard 770/735/740/745 770/735/740/745
  • Rated Payload - Loose Material (High Lift) 12.1 t 11.0 t
  • Rated Payload - Loose Material (Standard) 14.0 t 12.7 t
  • Rated Payload - Quarry Face 11.0 t 10.0 t
  • Operating Weight - High Lift 104005.0 lb 47175.0 kg
  • Operating Weight - Standard 97785.0 lb 44355.0 kg
  • Rated Payload - High Lift (Loose Material) 12.1 t 11.0 t
  • Rated Payload - High Lift (Quarry Face) 11.0 t 10.0 t
  • Rated Payload - Standard (Loose Material) 14.0 t 12.7 t
  • Rated Payload - Standard (Quarry Face) 11.0 t 10.0 t

Transmission

  • Transmission Type Cat Planetary Power Shift Cat Planetary Power Shift
  • Forward - 1 5.0 mile/h 7.3 km/h
  • Forward - 2 8.0 mile/h 12.2 km/h
  • Reverse - 1 5.0 mile/h 7.6 km/h
  • Reverse - 2 8.0 mile/h 13.6 km/h
  • Direct Drive - Forward 2 8.0 mile/h 12.7 km/h
  • Direct Drive - Forward 3 14.0 mile/h 22.0 km/h
  • Direct Drive - Forward 4 24.0 mile/h 39.0 km/h
  • Direct Drive - Reverse 2 9.0 mile/h 14.1 km/h
  • Direct Drive - Reverse 3 16.0 mile/h 25.0 km/h
  • Direct Drive - Reverse 4 25.4 mile/h 40.8 km/h

Hydraulic System - Lift/Tilt

  • Lift Cylinder - Bore 7.5 in 190.0 mm
  • Lift Cylinder - Stroke 45.0 in 1138.0 mm
  • Lift/Tilt System - Circuit Load Sense Load Sense
  • Lift/Tilt System - Pump 2 × 110 cc variable displacement 2 × 110 cc variable displacement
  • Maximum Flow at 2,165 rpm 123.0 gal/min 470.0 l/min
  • Relief Valve Setting - Lift/Tilt 4050.0 psi 27900.0 kPa
  • Tilt Cylinder - Bore 6.7 in 170.0 mm
  • Tilt Cylinder - Stroke 28.4 in 722.0 mm

Hydraulic Cycle Times

  • Rack Back 4.5 s 4.5 s
  • Raise 9.0 s 9.0 s
  • Dump 3.5 s 3.5 s
  • Total Hydraulic Cycle Time 21.3 s 21.3 s
  • Lower 5.2 s 5.2 s
  • Lower Float Down 4.3 s 4.3 s

Service Refill Capacities

  • Fuel Tank 141.0 gal (US) 535.0 l
  • Crankcase 9.0 gal (US) 34.0 l
  • Transmission 20.0 gal (US) 75.0 l
  • Hydraulic System - Tank Only 34.0 gal (US) 130.0 l
  • Axle Oil - Differentials and Final Drives - Front 49.0 gal (US) 186.0 l
  • Axle Oil - Differentials and Final Drives - Rear 45.0 gal (US) 170.0 l
  • Cooling Systems 26.0 gal (US) 100.0 l
  • Fuel Tank - Short Lift 127.0 gal (US) 481.0 l
  • Hydraulic System Factory Fill 87.0 gal (US) 330.0 l
  • Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage IV Only) 6.0 gal (US) 23.0 l

Buckets

  • Bucket Capacities 5-10.3 m3 (6.5-13.5 yd3) 5-10.3 m3 (6.5-13.5 yd3)

Axles

  • Front Fixed Fixed
  • Rear Trunnion Trunnion
  • Oscillation Angle ±12.5° ±12.5°
  • Oscillation Angle - Chain Arrangement ±8.5° ±8.5°

Brakes

  • Brakes ISO 3450:2011 ISO 3450:2011

Hydraulic System - Steering

  • ISO 5010:2007 - Maximum Flow at 1,400 rpm 52.0 gal/min 200.0 l/min
  • ISO 5010:2007 - Steering Cutoff Pressure 4000.0 psi 27600.0 kPa
  • ISO 5010:2007 - Steering System - Circuit Load Sense Load Sense
  • ISO 5010:2007 - Steering System - Pump Piston, variable displacement Piston, variable displacement
  • ISO 5010:2007 - Total Steering Angle 70° 70°

Air Conditioning System

  • Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions (Approximate) - High Lift Linkage

  • B-Pin Height - Maximum Lift 17.6 ft 5371.0 mm
  • Clearance at Maximum Lift 11.6 ft 3538.0 mm
  • Front Axle Centerline to Bucket Tip 15.3 ft 4649.0 mm
  • Ground to Center of Front Axle 3.2 ft 978.0 mm
  • Ground to Fuel Tank Clearance 2.3 ft 691.0 mm
  • Ground to Lower Hitch Clearance 1.5 ft 459.0 mm
  • Ground to Top of Exhaust Stacks 13.3 ft 4060.0 mm
  • Ground to Top of Hood 10.7 ft 3270.0 mm
  • Ground to Top of ROPS 13.5 ft 4100.0 mm
  • Maximum Overall Height - Bucket Raised 23.9 ft 7276.0 mm
  • Maximum Overall Length 38.0 ft 11591.0 mm
  • Note Specs are calculated with a 6.1 m3 (8.0 yd3) rock bucket. Specs are calculated with a 6.1 m3 (8.0 yd3) rock bucket.
  • Reach - Maximum Lift 7.4 ft 2248.0 mm
  • Rear Axle - Centerline to Bumper 10.3 ft 3132.0 mm
  • Wheel Base 12.5 ft 3810.0 mm

Dimensions (Approximate) - Standard Lift Linkage

  • B-Pin Height - Maximum Lift 16.1 ft 4912.0 mm
  • Clearance at Maximum Lift 10.1 ft 3079.0 mm
  • Front Axle Centerline to Bucket Tip 13.8 ft 4201.0 mm
  • Ground to Center of Front Axle 3.2 ft 978.0 mm
  • Ground to Fuel Tank Clearance 2.3 ft 691.0 mm
  • Ground to Lower Hitch Clearance 1.5 ft 459.0 mm
  • Ground to Top of Exhaust Stacks 13.3 ft 4060.0 mm
  • Ground to Top of Hood 10.7 ft 3270.0 mm
  • Ground to Top of ROPS 13.5 ft 4100.0 mm
  • Maximum Overall Height - Bucket Raised 22.4 ft 6817.0 mm
  • Maximum Overall Length 36.6 ft 11143.0 mm
  • Note Specs are calculated with a 6.1 m3 (8.0 yd3) rock bucket. Specs are calculated with a 6.1 m3 (8.0 yd3) rock bucket.
  • Reach - Maximum Lift 7.1 ft 2175.0 mm
  • Rear Axle - Centerline to Bumper 10.3 ft 3132.0 mm
  • Wheel Base 12.5 ft 3810.0 mm

Operator's Cab

  • ROPS/FOPS ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS) ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

Sound Performance - Tier 4 Final/Stage IV - Standard

  • Machine Sound Level (ISO 6395) 112.0 dB(A) 112.0 dB(A)
  • Operator Sound Level (ISO 6396) 72.0 dB(A) 72.0 dB(A)

Sound Performance - Tier 4 Final/Stage IV: Suppression

  • Machine Sound Level (ISO 6395) 110.0 dB(A) 110.0 dB(A)
  • Operator Sound Level (ISO 6396) 70.0 dB(A) 70.0 dB(A)

Bucket Ground Engaging Tools

Technology Solutions

System Match Efficiency

Sustainability

Structures

Serviceability

Safety

Power Train

Operator Station

Hydraulics

Customer Support

News & Events

View the latest company and product news, events and customer stories.

Promotions

View the latest offers available on a range of Cat® equipment and genuine parts.

Social Media

Connect with us to learn more about our company, products, services and customers.

Branch Locations

With branches across the UK & Ireland, you can be sure that we’re never far away.

Services

Effectively manage your equipment to reduce operating costs and improve efficiency.

Technology

Integrated technology can help you understand your equipment's output and help extend its lifespan.

Finance

Quick and easy financing with customised payment plans through Cat Financial.

Please share your feedback on Finning.com!

Close window

We are committed to providing you with the best site experience possible.  Please take our brief survey to tell us how we are doing.

Thank you in advance for your time!